TINTORA

Metal-sputtered rather than dyed, so the tint holds a true grey and won't fade or purple over time. Low haze, low signal interference, no mirror glare — solar control that behaves like clear glass.

VLT 25%

Dark Sputtered Neutral 25

TRUE GREYNON-METALLIC LOOKUV 99%

• Strong heat and glare reduction without a mirrored exterior
• Sputtered construction resists fading and colour shift
• Won't interfere with phone, GPS or wifi signal

Use case — South- or west-facing offices and homes with heavy afternoon sun, where a mirror finish isn't wanted on the façade.

VLT 35%

Medium Sputtered Neutral 35

TRUE GREYBALANCED LIGHTUV 99%

• Middle-ground tint: noticeable glare relief, still bright inside
• Neutral cast keeps interior colours accurate
• Clear, non-metallic appearance from the street

Use case — Living rooms, lounges and retail storefronts that want comfort from the sun without dimming the space.

VLT 50%

Light Sputtered Neutral 50

SUBTLEHEAT + UV ONLYUV 99%

• Barely visible tint — protects without changing the glass look
• Cuts UV and a meaningful share of solar heat
• Suits conservation areas and planning-sensitive elevations

Use case — Listed or planning-restricted buildings, and homeowners who want protection but no visible darkening.

A mirrored metallic finish that bounces solar heat back before it enters the glass. The darker grades give strong daytime privacy along with the highest heat rejection in the range.

VLT 5%

Very Dark Reflective Silver 05

MIRROR FINISHMAX PRIVACYHIGH HEAT REJECT

• Near-mirror exterior — effectively opaque from outside by day
• Highest solar heat rejection in the silver range
• Strong deterrent for overlooked ground-floor glazing

Use case — Ground-floor commercial glazing and garden rooms needing maximum daytime privacy and solar control.

VLT 20%

Dark Reflective Silver 20

MIRROR FINISHDAY PRIVACY

• Bold mirrored look with strong daytime privacy
• High solar heat rejection cuts cooling load
• Gives a modern, uniform façade across a full elevation

Use case — Office buildings, boardrooms and south-facing conservatories that want a defined, architectural mirror line.

VLT 30%

Medium Reflective Silver 30

SOFT SHEENBALANCED VIEW

• Visible metallic sheen with two-way visibility retained
• Good solar control without a fully mirrored look
• Flatters signage and window displays with a subtle shine

Use case — Retail shopfronts that want a premium reflective edge while keeping the window shoppable.

VLT 50%

Light Reflective Silver 50

LIGHT SHEENHIGH LIGHT IN

• Faint silver sheen visible mainly at certain angles
• Meaningful energy-efficiency gain with minimal visual change
• Keeps interiors bright while softening glare

Use case — Homes and offices wanting a contemporary, subtly reflective upgrade to plain glazing.

VLT 20% · STATIC

Dark Reflective Silver 20 STATIC

NO ADHESIVEREMOVABLEREUSABLE

• Clings to glass with static — no adhesive residue
• Same mirrored privacy and heat rejection as the standard 20
• Lifts off cleanly and can be reapplied elsewhere

Use case — Rental properties, tenants who can't alter the glass permanently, and temporary use in show homes or pop-ups.

Purpose-built one-way daytime privacy: the room stays visible to occupants while the glass reads as opaque or mirrored from outside in daylight. Effect reduces after dark once interior lights are on.

VLT 10%

Very Dark Reflective Privacy 10

ONE-WAY MIRRORDAYTIME PRIVACY

• Strongest privacy effect in the range by day
• Blocks visual access while occupants keep a clear outward view
• Adds solid solar heat and glare reduction

Use case — Bathrooms, ground-floor bedrooms and changing areas facing the street or a neighbouring property.

VLT 20%

Dark Reflective Privacy 20

ONE-WAY MIRRORMORE LIGHT IN

• Daytime privacy with noticeably more interior light than the 10
• Softer mirrored look, less severe on the façade
• Still cuts glare and solar heat meaningfully

Use case — Ground-floor living rooms and consultation or clinic rooms that need privacy but not a fully blacked-out feel.

The same non-fading sputtered build as the neutral range, cast in a warm bronze tone rather than grey — solar performance with a softer, traditional character.

VLT 20%

Dark Sputtered Bronze 20

WARM TONENON-FADINGUV 99%

• Warm bronze cast rather than a cold grey or metallic mirror
• Strong heat and glare control, sputtered for colour stability
• Non-metallic, so it won't clash with a period façade

Use case — Period or traditional properties wanting a warm tinted look with genuine solar performance.

VLT 35%

Medium Sputtered Bronze 35

WARM TONEBALANCED LIGHT

• Gentle amber warmth without heavily darkening the room
• Cuts glare on screens and soft furnishings
• Reads as a design choice, not just a solar film

Use case — Conservatories and orangeries wanting a warm, subtle tint that suits timber and brick surrounds.

VLT 50%

Light Sputtered Bronze 50

SUBTLE WARMTHUV 99%

• Faint warm cast, close to a clear pane
• Protects furnishings from UV fading
• Suits homes wanting protection with almost no visual change

Use case — Homes prioritising UV protection for furniture and flooring, with only a hint of tint.

Mirrored finishes in a defined hue — a statement choice for architecture and branding as much as a solar-control one.

VLT 20%

Dark Reflective Blue 20

COOL MIRRORDAY PRIVACY

• Cool-toned mirrored finish for a modern architectural read
• Strong daytime privacy and solar heat rejection
• Distinct, brand-forward look for glass frontages

Use case — Contemporary commercial buildings and brands wanting a defined blue reflective identity on the façade.

VLT 20%

Dark Reflective Green 20

GREEN MIRRORDAY PRIVACY

• Green-toned mirror that blends with landscaping and greenery
• Same strong privacy and heat rejection as the blue and silver 20s
• Softens the harshness of a full silver mirror finish

Use case — Garden-facing elevations and eco-branded buildings wanting a reflective finish that sits naturally against planting.

VLT 20%

Dark Reflective Bronze 20

BRONZE MIRRORDAY PRIVACY

• Warm mirrored bronze — more reflective than the sputtered bronze range
• Strong daytime privacy paired with a heritage-toned finish
• High solar heat rejection for west- and south-facing glass

Use case — Heritage-style commercial buildings wanting a reflective statement finish without going silver.

Thicker polyester film (measured in microns) that holds shattered glass together on impact, reducing injury from breakage and slowing forced entry. Available clear-leaning or combined with a reflective finish.

VLT 35% · 100μ

Medium Neutral 35 100 Micron Safety

ANTI-SHATTER100 MICRONNEUTRAL TINT

• Holds broken glass in the frame instead of shattering outward
• Moderate tint adds glare and heat control on top of safety
• Neutral grey keeps a true, non-metallic appearance

Use case — Schools, offices and homes in higher-traffic or vandalism-prone spots needing impact protection with visible tint.

VLT 60% · 100μ

Light Neutral 60 100 Micron Safety

ANTI-SHATTER100 MICRONNEAR-CLEAR

• Shatter protection with almost no visible tint
• Keeps glass looking clear for shopfronts and public buildings
• Meets safety-glazing needs without changing the aesthetic

Use case — Shopfronts, schools and public buildings that need compliant safety glazing while keeping the glass visually clear.

VLT 20% · 100μ

Dark Reflective Silver 20 100 Micron

ANTI-SHATTER100 MICRONMIRROR FINISH

• Combines mirrored daytime privacy with anti-shatter backing
• Solar heat rejection alongside impact protection
• One film doing the job of both a privacy and a safety product

Use case — Ground-floor commercial premises wanting security and daytime privacy in a single application.

VLT 20% · 200μ

Dark Reflective Silver 20 200 Micron

HIGH SECURITY200 MICRONMIRROR FINISH

• Double the thickness of the 100 micron grade for higher-grade security
• Greater resistance to forced entry and smash-and-grab attempts
• Retains the full mirrored privacy and heat rejection of Silver 20

Use case — Banks, retail premises and high-risk ground-floor glazing needing enhanced security alongside reflective privacy.

VLT 30% · 100μ

Medium Reflective Silver 30 100 Micron Safety

ANTI-SHATTER100 MICRONSOFT SHEEN

• Balances visibility, solar control and impact protection
• Lighter mirror effect than the 20 grade, easier to sit within a mixed façade
• Practical everyday safety spec for occupied buildings

Use case — Offices and schools wanting a workable balance of daylight, glare control and shatter protection.

A clear-leaning film built around one job: blocking ultraviolet light. Minimal change to the glass, maximum protection for what sits behind it.

VLT 60%

Neutral UV 60 Window Film

VIRTUALLY CLEARUV 99%

• Blocks up to 99% of UV with almost no visible tint
• Protects artwork, stock and furnishings from fading
• Lowest-impact option for glass that must stay looking untinted

Use case — Galleries, retail displays and homes with fade-prone furnishings that need UV protection without changing how the window looks.

Interior glazing films built for pattern, branding and light control rather than solar performance — etched frost patterns, manifestation stripes, and solid colour bands for partitions, doors and feature glass.

PATTERN

Decorative Frosted Squares

ETCHED PATTERNPRIVACYTWO-WAY

• Etched square-grid pattern that reads as genuine sandblasted glass
• Blocks direct sightlines while still passing light and shape through
• Suits full-height partitions and doors needing a structured, graphic look

Use case — Office partitions, meeting rooms and glazed doors wanting a geometric privacy pattern.

PATTERN

Decorative Frosted Shells

ETCHED PATTERNART DECOPRIVACY

• Art Deco-inspired scalloped shell motif etched into a frosted ground
• Adds boutique character while still screening the space behind
• Pattern reads clearly from both sides of the glass

Use case — Reception areas, hospitality interiors and boutique retail wanting a statement pattern.

PATTERN

Decorative Frosted Swirls

ETCHED PATTERNORGANICPRIVACY

• Flowing swirl motif over a frosted ground for a softer, hand-drawn feel
• Breaks up sightlines without the rigidity of a grid pattern
• Suits feature partitions wanting texture rather than a hard geometric line

Use case — Creative studios, breakout spaces and feature partitions wanting a relaxed, organic pattern.

GRADIENT

Decorative Graduating Frost

GRADIENT FROSTSEATED PRIVACYCLEAR ABOVE

• Frost density increases from top to bottom, so the upper glass stays clear
• Screens desks and seated sightlines while keeping daylight and headroom views open
• Reads as a soft architectural gradient rather than a hard privacy band

Use case — Meeting room glazing and office partitions wanting seated-height privacy with a clear view above.

10MM

Decorative White 10mm Lines

MANIFESTATION10MM STRIPEWHITE

• Fine 10mm white stripes at regular, code-compliant intervals
• Meets manifestation and safety-marking requirements on frameless glass
• Adds definition to large glazed areas without full coverage

Use case — Glass doors, partitions and balustrades needing visible manifestation markings on clear glass.

18MM

Decorative Frosted 18mm Lines

MANIFESTATION18MM STRIPEETCHED LOOK

• Wider 18mm frosted bands for a bolder, more visible manifestation line
• Etched-glass appearance rather than a printed or applied strip
• Works well spaced across large glazed runs and shopfronts

Use case — Larger glass partitions and shopfronts wanting a stronger, more visible manifestation pattern.

10MM

Decorative Silver 10mm Lines

MANIFESTATION10MM STRIPEMETALLIC

• Metallic silver stripes catch the light as you move past the glass
• Same code-compliant spacing as the white and frosted line options
• A premium, more reflective alternative to a plain frosted stripe

Use case — Feature partitions and premium office fit-outs wanting a manifestation pattern with a metallic finish.

VLT 50%

Decorative Non-Reflective Light Green 50

COLOUR BANDNON-REFLECTIVELIGHT TONE

• Translucent light green colour band with high light transmission
• Adds a soft branded colour accent without darkening the space
• Flat, non-reflective finish keeps the glass reading matte, not glossy

Use case — Branded office partitions and breakout spaces wanting a light, calming colour accent.

VLT 34%

Decorative Non-Reflective Red 34

COLOUR BANDNON-REFLECTIVEBOLD

• Bold, saturated red band for strong visual impact
• Lower light transmission gives a deeper, more opaque colour
• Useful for wayfinding, signage zones or matching a brand colour

Use case — Reception walls, brand zones and feature partitions wanting a strong red accent.

VLT 40%

Decorative Non-Reflective Bottle Green 40

COLOUR BANDNON-REFLECTIVEDEEP TONE

• Deep bottle-green tone for a rich, traditional colour statement
• Moderate light transmission keeps some daylight passing through
• Complements timber and brass interior finishes

Use case — Hospitality interiors, private dining rooms and heritage-style offices wanting a deep green accent band.

VLT 60%

Decorative Non-Reflective Light Blue 60

COLOUR BANDNON-REFLECTIVELIGHT TONE

• Pale, airy blue band with high light transmission
• Adds a calm, corporate colour accent without darkening the space
• Popular choice for healthcare and education colour-coding

Use case — Healthcare, education and corporate interiors wanting a light, calming blue colour-code.

VLT 35%

Decorative Non-Reflective Bronze 35

COLOUR BANDNON-REFLECTIVEWARM TONE

• Warm amber-bronze band that echoes the sputtered bronze range in a solid decorative colour
• Moderate transmission for a rich, warm accent
• Sits well against wood and stone interior finishes

Use case — Boutique offices and hospitality fit-outs wanting a warm decorative colour band.

VLT 24%

Decorative Non-Reflective Ocean Blue 24

COLOUR BANDNON-REFLECTIVESATURATED

• Deep, saturated ocean-blue colour for a bold statement band
• Lower transmission gives strong colour depth and definition
• Reads as a deliberate design feature rather than a solar film

Use case — Brand-forward offices and feature walls wanting a strong, saturated blue accent.